gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Auxiliary Blower Motor Resistor Assembly Replacement|Page 13346 > < Auxiliary Blower Motor Resistor Assembly Replacement|Page 13344
Page 2
background image

1. Install the blower motor resistor assembly.

Notice:  Refer to Fastener Notice.

2. Install the blower motor resistor assembly retaining screws (1).

Tighten the screws to 2 N.m (18 lb in).

3. Connect the wires between the blower motor and resistor to retainer on heater case.

Auxiliary Blower Motor Resistor Assembly Replacement|Page 13346 > < Auxiliary Blower Motor Resistor Assembly Replacement|Page 13344