Savana 1500 RWD V6-4.3L (2007)
6. Install the evaporator inlet hose nut to the front evaporator tube.
Tighten the nut (1) to 16 N.m (12 lb ft).
7. Install the front evaporator tube to the condenser.
8. Install the front evaporator tube nut (1) to the condenser.
Tighten the nut to 16 N.m (12 lb ft).
9. Install the grille.
10. Install the coolant recover reservoir.
11. Evacuate and recharge the A/C system. Refer to Refrigerant Recovery and Recharging.
12. Leak test the fittings of the components using the J 39400-A.
