Savana 1500 RWD V6-4.3L (2007)
Fuel Level Sensor: Service and Repair
Fuel Level Sensor Replacement
Fuel Level Sensor Replacement
Removal Procedure
Caution: Refer to Battery Disconnect Caution.
1. Disconnect the negative battery cable.
2. Relieve the fuel system pressure. Refer to Fuel Pressure Relief (With CH 48027) Fuel Pressure Relief (Without CH 48027).
3. Drain the fuel tank. Refer to Fuel Tank Draining.
4. Remove the fuel tank.
5. Remove the fuel sender assembly.
6. Disconnect the fuel pump electrical connector.
7. Remove the electrical connector retaining clip from the fuel level sensor.
8. Disconnect the electrical connector from the fuel level sensor under the fuel sender cover.
9. Remove the retaining clip from the fuel level sensor.
10. Squeeze the locking tangs and remove the fuel level sensor (1).
Installation Procedure
