Savana 1500 RWD V6-4.3L (2007)
Caution: Verify that the poppet nozzles are firmly seated and locked in their casting sockets in order to reduce the risk of fire and
personal injury. An unlocked poppet nozzle could work loose from its socket and produce a fuel leak.
Important: The fuel meter body assemblies are numbered to indicate the poppet nozzle order.
3. Push the poppet nozzles into the casting sockets.
4. Inspect the poppet nozzles in order to ensure the nozzles are firmly seated and locked in the casting sockets.
5. Install the upper intake manifold assembly.
6. Tighten the fuel filler cap.
7. Connect the negative battery cable.
8. Inspect for leaks:
1. Turn ON the ignition for 2 seconds.
2. Turn OFF the ignition for 10 seconds.
3. Turn ON the ignition.
4. Inspect for fuel leaks.
9. Install the engine cover.
