Savana 1500 RWD V6-4.3L (2007)
Fuel Return Line: Service and Repair
Fuel Hose/Pipes Assembly Replacement
Fuel Hose/Pipes Assembly Replacement
Removal Procedure
Caution: Refer to Battery Disconnect Caution.
1. Disconnect the negative battery cable.
2. Relieve the fuel system pressure. Refer to Fuel Pressure Relief (With CH 48027) Fuel Pressure Relief (Without CH 48027).
3. Drain the fuel tank. Refer to Fuel Tank Draining.
4. Remove the fuel tank.
5. Remove the fuel feed and return pipes (6) from the fuel sender (1).
Installation Procedure
1. Install the fuel feed and return pipes (6) to the fuel sender (1).
2. Install the fuel tank.
3. Lower the vehicle.
4. Refill the fuel tank.
5. Tighten the fuel filler cap.
6. Connect the negative battery cable.
7. Inspect for leaks:
1. Turn ON the ignition for 2 seconds.
2. Turn OFF the ignition for 10 seconds.
3. Turn ON the ignition.
4. Inspect for fuel leaks.
