Savana 1500 RWD V6-4.3L (2007)
Fuel Level Sensor: Service and Repair
Fuel Sender Assembly Replacement
Fuel Sender Assembly Replacement
Tools Required
J 45722 Fuel Sender Lock Nut Wrench
Removal Procedure
Caution: Refer to Battery Disconnect Caution.
1. Disconnect the negative battery cable.
2. Relieve the fuel system pressure. Refer to Fuel Pressure Relief (With CH 48027) Fuel Pressure Relief (Without CH 48027).
3. Drain the fuel tank. Refer to Fuel Tank Draining.
4. Remove the fuel tank.
Notice: Avoid damaging the lock ring. Use only J-45722 to prevent damage to the lock ring.
Notice: Do Not handle the fuel sender assembly by the fuel pipes. The amount of leverage generated by handling the fuel pipes could damage the
joints.