Savana 1500 RWD V6-4.3L (2007)
5. Remove the generator bolts.
6. Remove the generator.
Installation Procedure
1. Install the generator.
Notice: Refer to Fastener Notice.
2. Install the generator bolts.
Tighten the bolts to 50 N.m (37 lb ft).
3. Install the generator cable to the generator, perform the following:
1. Install the generator cable.
2. Install the generator cable nut to the terminal stud.
Tighten the nut to 9 N.m (80 lb in).
3. Slide the boot over the terminal stud.