Savana 1500 RWD V6-4.3L (2007)
1. Install the relay rod to the vehicle.
2. Install the relay rod to the pitman arm and idler arm.
Notice: Refer to Fastener Notice .
3. Install the new relay rod to the idler arm retaining nut.
Tighten the nut to 63 N.m (47 lb ft).
4. Install the new relay rod to the pitman arm retaining nut.
Tighten the nut to 63 N.m (47 lb ft).
5. Install the inner tie rods to the relay rod.