Savana 1500 RWD V6-4.3L (2007)
2. Install the power brake booster inlet hose (1) to the power brake booster (2). Hand tighten.
3. Raise the vehicle.
4. Install the power brake booster inlet hose (2) to the power steering pump (1) through the wheel well.
Tighten the hose fitting to 33 N.m (24 lb ft).
5. Lower the vehicle.
6. Tighten the power brake booster inlet hose to the power brake booster.
Tighten the hose fitting to 33 N.m (24 lb ft).
7. Bleed the power steering system. Refer to Power Steering System Bleeding .
8. Remove the drain pan from under the vehicle.