Savana 1500 RWD V6-4.3L (2007)
Notice: Refer to Installing Hoses Without Twists or Bends Notice .
1. Route the hose in the same position the hose occupied prior to removal.
Notice: Refer to Fastener Notice .
2. Install the steering gear outlet hose to the power steering gear.
Tighten the hose fitting to 33 N.m (24 lb ft).
3. Install the power steering outlet hose to the power steering pump.
4. Lower the vehicle.
5. Bleed the power steering system. Refer to Power Steering System Bleeding .
6. Remove the drain pan from under the vehicle.
