Savana 1500 RWD V6-4.3L (2007)
6. Remove the transmission mount to the transmission support retaining nuts, for 4WD vehicles.
7. Remove the transmission support to the frame mounting bolts.
8. Remove the transmission support from the vehicle.
Installation Procedure
1. Install the transmission support to the vehicle.
Notice: Refer to Fastener Notice.
2. Install the transmission support to the frame mounting bolts.
*
Tighten the bolts to 50 N.m (66 lb ft), except Cutaway.
*
Tighten the bolts to 65 N.m (48 lb ft), Cutaway.