Savana 1500 RWD V6-4.3L (2007)
3. Install the differential side bearing onto the differential case by doing the following:
1. Install one of the following side bearing installers to the J 8092 (1) and place over the differential side bearing as shown:
-
For the 8.6 inch axle, use J 21784 (2)
-
For the 9.75 inch without RPO G80 or 10.5 inch axles, use J 24430 or the J 45900 (2)
-
For the 9.75 inch with RPO G80, use DT46725 (2)
2. Drive the bearing onto the differential case using the J 21784 , the J 24430 , the J 45900 , or the DT46725 and the J 8092 .
4. Install the differential assembly.