gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

ABOUT US
Rear Axle Shaft Seal and/or Bearing Replacement|Page 10634 > < Rear Axle Shaft Seal and/or Bearing Replacement|Page 10632

Savana 1500 RWD V6-4.3L (2007)

Page 2
background image

8. Remove the adjusting nut.

9. Remove the hub from the axle housing.

10. Remove the rotor, if necessary.
11. Remove the oil seal from the wheel hub using a suitable seal removal tool.

12. Remove the inner hub bearing.

13. Remove the inner hub bearing cup using a brass drift and a hammer.

Rear Axle Shaft Seal and/or Bearing Replacement|Page 10634 > < Rear Axle Shaft Seal and/or Bearing Replacement|Page 10632