Savana 1500 RWD V6-4.3L VIN X (2004)
1. Install the passenger side front corner garnish molding to the vehicle.
2. Slip the seat belt through the slot in the passenger side front corner garnish molding.
3. Press on the passenger side front corner garnish molding in order to engage the retaining clips.
4. Install the passenger side body side rear upper garnish molding. Refer to Garnish Molding Replacement - Body Side Rear Upper (See: Garnish
Molding Replacement - Body Side Rear Upper).
5. Install the passenger side body side trim panel. Refer to Trim Panel Replacement - Right Body Side (See: Trim Panel Replacement - Right Body
Side).
Garnish Molding Replacement - Sliding Door
Garnish Molding Replacement - Sliding Door
Removal Procedure
1. Grasp the sliding side door upper trim panel.
Pull on the panel in order to disengage the retaining clips.
2. Inspect the sliding side door upper trim panel for broken or missing clips.
Replace the clips if needed.
Installation Procedure
1. Install the sliding side door upper trim panel to the vehicle.
2. Align the tabs on the trim panel with the retainers on the door.
Press the trim panel into place.
Garnish Molding Replacement - Upper Pillar
Garnish Molding Replacement - Upper Pillar
