Savana 1500 RWD V6-4.3L VIN X (2004)
10. Loosen and remove the brake fluid outlet pipe (5). Cap or plug the brake pipe to prevent contamination and brake fluid loss.
11. Crimp the inlet hose (4) from the master cylinder to the PCP (2) to prevent fluid from leaking out and draining the master cylinder reservoir.
12. Important:
The area around the PCP MUST be free from loose dirt to prevent contamination of disassembled ABS components.
Remove the inlet hose clamp (3) from the PCP assembly (2) inlet port.
13. Remove the inlet hose (4) from the PCP assembly (2) inlet port.
