Savana 1500 RWD V6-4.3L VIN X (2004)
Wheel Speed Sensor: Service and Repair
Wheel Speed Sensor Replacement
Wheel Speed Sensor Replacement (2WD)
Caution: Refer to Brake Dust Caution in Service Precautions.
Removal Procedure
1. Raise and support the vehicle.
2. Remove the tire and wheel.
3. Remove the brake rotor (2) shown on the 1500 series.
4. Remove the WSS cable mounting clip from the knuckle.
5. Remove the WSS cable mounting clip from the upper control arm.
6. Remove the WSS cable mounting clip from the frame attachment point.
7. Remove the WSS cable electrical connector.