Savana 1500 RWD V6-4.3L VIN X (2004)
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the valve rocker arm cover bolts.
^
Tighten the valve rocker arm cover bolts to 12 Nm (106 inch lbs.).
5. Install the oil fill tube in the right valve rocker arm cover.
6. Install the oil fill tube and bolt to the oil fill tube lower support.
^
Tighten the oil fill tube to lower support bolt to 5 Nm (44 inch lbs.).
7. Install the PCV hose in the valve rocker arm cover and to the air inlet duct.
8. Connect the spark plug wires to the distributor cap.
9. Position the engine wiring harness.
10. Install the engine cover.
11. Install the air cleaner assembly.
12. Reposition the coolant reservoir and install the bolt.
^
Tighten the bolt to 11 Nm (97 inch lbs.).
