Savana 1500 RWD V6-4.3L VIN X (2004)
Center Mounted Brake Lamp: Removal and Replacement
Center High Mounted Stop Lamp Applique Replacement
Removal Procedure
1. Remove the upper quarter panel applique.
2. Remove the center high mounted stoplamp lens.
3. Remove the nuts that retain the center high mounted stoplamp applique to the body.
4. Remove the screws that retain the center high mounted stoplamp applique to the body.
5. Remove the center high mounted stoplamp applique from the vehicle.
Installation Procedure
1. Install the center high mounted stoplamp applique to the vehicle.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the center high mounted stoplamp applique retaining screws to the body.
Tighten the screws that retain the center high mounted stoplamp applique to 2 N.m (18 lb in).
3. Install the center high mounted stoplamp applique retaining nuts to the body.
Tighten the nuts that retain the center high mounted stoplamp applique to 6 N.m (53 lb ft).
