gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Fuel Filter > < 4L60-E/4L65-E|Page 1342
Page 2
background image

3. Install the oil pan gasket to the pan.
4. Install the magnet into the bottom of the pan.

5. Notice:  Refer to Fastener Notice in Service Precautions.

Install the oil pan to the transmission with seventeen bolts.
^

Tighten the oil pan bolts to 11 Nm (97 inch lbs.).

6. Apply a small amount of sealant GM P/N 12346004 to the treads of the drain plug, if equipped.
7. Install the oil pan drain plug, if equipped.

^

Tighten the oil pan drain plug to 18 Nm (13 ft. lbs.).

8. Lower the vehicle.
9. Fill the transmission to the proper level with Dexron III transmission fluid.   

Fuel Filter > < 4L60-E/4L65-E|Page 1342