Savana 1500 RWD V6-4.3L VIN X (2004)
7. Install the accelerator control cable bracket using the mounting fasteners.
Tighten
Tighten the fasteners to 12 N.m (106 lb in).
IMPORTANT: Make sure the accelerator and the cruise control cables do not hold the throttle open.
8. Install the accelerator cable.
9. Install the cruise control cable.
10. Install the air cleaner outlet resonator.
11. Install the engine cover.
12. Connect the negative battery cable.
IMPORTANT: The accelerator pedal should operate freely without binding between full and closed throttle.