Savana 1500 RWD V6-4.3L VIN X (2004)
Transmission Mode Switch: Service and Repair
Tow/Haul Switch Replacement
Removal Procedure
1. Remove the instrument panel trim plate bezel.
2. Disconnect the electrical connector from the tow/haul switch.
3. Push in clips (1) on both sides of the switch.
4. Push the switch rearward to remove the switch from the trim.
Installation Procedure
1. Install the switch into the trim plate bezel opening by pushing the switch in until the clip (1) snap into place.
2. Connect the electrical connector to the tow/haul switch.
3. Install the instrument panel trim plate bezel.
