Savana 1500 RWD V6-4.3L VIN X (2004)
1. Install the lower intermediate shaft to the vehicle.
2. Connect the lower intermediate shaft to the intermediate shaft bearing.
3. Notice: Refer to Fastener Notice in Service Precautions.
Install the lower intermediate shaft to the intermediate shaft bearing retaining bolt.
-
Tighten the bolt to 30 Nm (22 ft. lbs.).
4. Align the marks made at removal and Install the lower intermediate shaft to the power steering gear.
5. Install the lower intermediate shaft to the power steering gear retaining bolt.
-
Tighten the bolt to 61 Nm (45 ft. lbs.).
6. Remove the J 42640 from the steering column lower access hole.