gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

ABOUT US
Rear Axle Shaft Seal and/or Bearing Replacement|Page 4703 > < Rear Axle Shaft Seal and/or Bearing Replacement|Page 4701

Savana 1500 RWD V6-4.3L VIN X (2004)

Page 5
background image

2. Disconnect the propeller shaft from the rear axle pinion yoke. 
3. Place an alignment mark between the pinion and the pinion yoke.

4. Install the J8614-01 as shown.
5. Remove the pinion nut while holding the J8614-01.

6. Remove the washer.

7. Install the J8614-2 (2) and the J8614-3 (3) into the J8614-01 (1) as shown.

Rear Axle Shaft Seal and/or Bearing Replacement|Page 4703 > < Rear Axle Shaft Seal and/or Bearing Replacement|Page 4701