Savana 1500 RWD V6-4.3L VIN X (2004)
Windshield Washer Pump: Service and Repair
WASHER PUMP REPLACEMENT
REMOVAL PROCEDURE
1. Open and support the hood.
2. Remove the upper fender support.
3. Remove the bolt from the washer solvent container.
4. Lift the washer solvent container up enough past the horns in order to access the washer hose and the electrical connector.
5. Disconnect the electrical connector from the washer pump.
6. Disconnect the washer hose from the washer pump.
7. Place a cap on the washer pump to prevent any washer solvent loss.
8. Remove the washer solvent container from the vehicle.
9. Drain the washer solvent into a suitable container.