Savana 1500 RWD V6-4.3L VIN X (2004)
1. Place the wiper motor module (3) into the vehicle.
2. Connect the wiper motor module electrical connector.
3. Align the wiper motor module studs to the cowl vent.
NOTE: Refer to Fastener Notice in Service Precautions.
4. Install the nuts.
Tighten
Tighten the nuts to 10 N.m (89 lb in).
5. Install the air inlet grille (1,2).
6. Install the wiper arm assemblies.
7. Install the wiper motor fuse.
