Savana 2500 V6-4.3L VIN X (2005)
Brake Master Cylinder: Service and Repair
Master Cylinder Replacement
Master Cylinder Replacement
Caution: Refer to Brake Fluid Irritant Caution in Service Precautions.
Notice: Refer to Brake Fluid Effects on Paint and Electrical Components Notice in Service Precautions.
Removal Procedure
1. Apply the park brake and block the wheels.
2. Disconnect the electrical connector from the brake fluid level sensor, if applicable.
3. Remove the driver side upper fender support.
4. Important:
Install a rubber cap or plug to the exposed brake pipe fitting ends in order to prevent brake fluid loss and contamination.
Disconnect the brake pipes from the master cylinder.
5. Plug the open brake pipe ends.
6. For vehicles with JL4, crimp the hose (4) at the master cylinder to prevent fluid from leaking out.
7. Remove the clamp (5) and hose (4) from the reservoir. Plug the port in the reservoir.
