Savana 2500 V6-4.3L VIN X (2005)
Parking Brake Cable: Service and Repair
Park Brake Cable Replacement - Right Rear
Park Brake Cable Replacement - Right Rear
Removal Procedure
1. Release the park brake.
2. Disable the park brake cable automatic adjuster.
3. Raise and support the vehicle. Refer to Vehicle Lifting.
4. Disconnect the cable from the equalizer.
5. For cargo and passenger vehicles, remove the cable from the rear crossmember by depressing the locking tabs.
6. For cutaway vehicles, remove the cable from the mounting bracket by depressing the locking tabs.
7. Pass the cable through the cable guide.
8. Disconnect the rear axle vent hose clip from the cable (1500 Series).