Savana 2500 V6-4.3L VIN X (2005)
Notice: Proper alignment of the crankshaft rear oil seal is critical. Install the crankshaft rear oil seal near to flush and square to the crankshaft rear
oil seal housing. Failing to do so may cause the crankshaft rear oil seal or the crankshaft rear oil seal installation tool to fail.
10. Install the crankshaft rear oil seal onto the crankshaft and into the crankshaft rear oil seal housing.
10.1.
Turn the J 35627-B wing nut clockwise until the crankshaft rear oil seal is installed near to flush and square to the crankshaft rear oil seal
housing
Increased resistance will be felt when the crankshaft rear oil seal has reached the bottom of the crankshaft rear oil seal housing bore
10.2.
Turn the J 35621-B wing nut counterclockwise to release the J 35621 B from the crankshaft rear oil seal.
10.3.
Remove the J 35621-B from the crankshaft.
10.4.
Wipe off any excess engine coil with a clean rag.
11. Install the engine flywheel.
12. Install the transmission assembly.
