Savana 2500 V6-4.3L VIN X (2005)
Turn Signal Lamp: Service and Repair
Park/Turn Signal Lamp Replacement (Uplevel Vehicles)
PARK/TURN SIGNAL LAMP REPLACEMENT (UPLEVEL VEHICLES)
REMOVAL PROCEDURE
1. Remove the park/turn signal lamp (3) from the grille.
2. Disconnect the bulb socket(s) (1) from the park/turn signal lamp by turning the bulb sockets in a counterclockwise direction.
3. Remove the bulb(s) (1) from the socket.
INSTALLATION PROCEDURE
1. Install the bulb(s) (1) into the socket by turning the bulb sockets in a clockwise direction.
2. Connect the bulb socket(s) (1) into the park/turn signal lamp.
3. Install the park/turn signal lamp (3) to the grille (5).
