gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Fuel Filter > < 4L60-E/4L65-E|Page 2089
Page 2
background image

3. Install the oil pan gasket to the pan.
4. Install the magnet into the bottom of the pan.

5. Notice:  Refer to Fastener Notice in Service Precautions.

Install the oil pan to the transmission with seventeen bolts.
^

Tighten the oil pan bolts to 11 Nm (97 inch lbs.).

6. Apply a small amount of sealant GM P/N 12346004 to the treads of the drain plug, if equipped.
7. Install the oil pan drain plug, if equipped.

^

Tighten the oil pan drain plug to 18 Nm (13 ft. lbs.).

8. Lower the vehicle.
9. Fill the transmission to the proper level with Dexron® III transmission fluid.

Fuel Filter > < 4L60-E/4L65-E|Page 2089