Savana 2500 V6-4.3L VIN X (2005)
25. Disconnect and remove the J 44466-10 (1) from the J 44466-12 (3) and the J 41413.
26. Remove the J 39021-301, J 39021-210 and J 39021 from the metering body.
27. Install the vehicle electrical connector to the metering body.
28. Install brake booster vacuum hose and connector to the intake manifold.
29. Install ignition wires 1, 3, and 5 to the distributor cap.
30. Install the resonator and air intake duct to the throttle body and hand tighten wing nut.
31. Obtain J 38500-A (2).
IMPORTANT: Make sure the valve at the bottom of the canister (3) is closed.
32. Remove the canister top and add top engine cleaner GM P/N 1050002 (Canadian P/N 992872) to the canister.
33. Fill the remainder of the canister with regular unleaded gasoline and install the canister top.
34. Suspend J 38500-A from a convenient underhood location.
