Savana 2500 V6-4.3L VIN X (2005)
Fuel Pressure Test Port: Service and Repair
FUEL PRESSURE CONNECTION VALVE REPLACEMENT
REMOVAL PROCEDURE
1. Remove the engine cover.
2. Relieve the fuel system pressure. Refer to Fuel Pressure Relief Procedure.
3. Use a standard valve core tool in order to remove the valve core (2).
INSTALLATION PROCEDURE
1. Use a standard valve core tool in order to install a new valve core (2).
2. Tighten the fuel filler cap.
3. Connect the negative battery cable.
4. Inspect for leaks.
1. Turn ON the ignition for 2 seconds.
2. Turn OFF the ignition for 10 seconds.
3. Turn ON the ignition for 2 seconds.
4. Inspect for fuel leaks.
5. Install the fuel pressure connection valve cap (3).
6. Install the engine cover.
