Savana 2500 V6-4.3L VIN X (2005)
Positive: Service and Repair
Replacement procedure
BATTERY POSITIVE CABLE REPLACEMENT
REMOVAL PROCEDURE
1. Remove the bolt retaining the coolant recovery reservoir or surge tank.
2. Move the coolant recovery reservoir or the surge tank aside.
3. Disconnect the battery negative cable from the battery.
CAUTION: Refer to Battery Disconnect Caution in Service Precautions.
4. Disconnect the battery positive cable from the battery.
5. If equipped with the 4.8L, 5.3L or 6.0L engine, disconnect the positive lead to the junction block.
6. Raise the vehicle. Refer to Vehicle Lifting.
