Savana 2500 V6-4.3L VIN X (2005)
4. Install the positive lead to the starter solenoid.
Tighten the positive lead to starter solenoid to 10 N.m (89 lb in).
5. Lower the vehicle.
6. If equipped with the 4.8L, 5.3L or 6.0L engine, install the positive lead to the junction block.
Tighten the junction block nut to 10 N.m (89 lb in).
7. Connect the battery positive cable to the battery.
Tighten the battery terminals to 17 N.m (13 lb ft).
8. Connect the battery negative cable to the battery.
9. Install the coolant recovery reservoir or surge tank and the bolt.
