Savana 2500 V6-4.3L VIN X (2005)
Notice: Refer to Fastener Notice in Service Precautions.
Important: Do not reuse the rear axle housing cover bolts.
3. Install the new rear axle housing cover bolts.
Tighten the rear axle housing cover bolts to 61 Nm (45 ft. lbs.).
Important: Allow the sealant to cure for 1 hour before filling the axle with axle lubricant.
4. Fill the rear axle with axle lubricant. Use the proper fluid.
5. Install rear axle fill plug.
Tighten the rear axle fill plug to 33 Nm (24 ft. lbs.).
6. Lower the vehicle.
