gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Handle Bezel Replacement - Inside|Page 16013 > < Handle Bezel Replacement - Inside|Page 16011
Page 4
background image

5. Install the armrest (3). Refer to Armrest Replacement (See: Front Door/Front Door Panel/Service and Repair).
6. Install the front door trim plate. Refer to Door Trim Plate Replacement - Front ().

Trim Panel Replacement - Side Rear Door - 60/40 Left (With RPO Code E26, 40 Door)

TRIM PANEL REPLACEMENT - SIDE REAR DOOR - 60/40 LEFT (WITH RPO CODE E26, 40 DOOR)

TOOLS REQUIRED

J 38778 Door Trim Pad and Garnish Clip Remover

REMOVAL PROCEDURE

1. Remove the side door pull handle screws (3).
2. Remove the side door pull handle (2).
3. Use the J 38778 to disengage the retainers around the outside edges of the lower portion of the door trim panel (1).
4. Carefully pull the door trim panel (1) out of the retainers around the window opening.A long flat bladed tool may be necessary to aid in releasing

the door trim panel (1) from the window opening retainers.

5. Remove the front door panel (1) from the vehicle.

INSTALLATION PROCEDURE

1. Install the door trim panel (1) to the door by performing the following:

-

Align the door trim panel (1) to the retainers in the window opening.

-

Push towards the door to engage the retainers.

-

Align the retainers on the edges of the lower portion of the door trim (1).

-

Push towards the door to engage the retainers.

Handle Bezel Replacement - Inside|Page 16013 > < Handle Bezel Replacement - Inside|Page 16011