Savana 2500 V8-6.0L VIN U (2006)
Windshield Garnish Molding Replacement
WINDSHIELD GARNISH MOLDING REPLACEMENT
REMOVAL PROCEDURE
1. Remove the passenger side assist handle.
2. Grasp and gently pull the windshield garnish molding in order to release the clips.
3. Remove the windshield garnish molding from the vehicle.
4. Inspect the windshield garnish molding for broken or missing retaining clips.Replace the windshield garnish molding or clips as needed.
INSTALLATION PROCEDURE
1. Install the windshield garnish molding to the vehicle.
2. Align the clips and press on the windshield garnish molding in order to engage the clips.
3. Install the passenger side assist handle.
