Savana 2500 V8-6.0L VIN U (2006)
1. Grasp and gently pull the rear door opening frame garnish molding down in order to disengage the retaining clips.
2. Remove the rear door opening frame garnish molding from the vehicle.
3. Inspect the rear door opening frame garnish molding for broken or missing retaining clips. Replace the clips as needed.
Installation Procedure
1. Install the rear door opening frame garnish molding to the vehicle.
2. Press on the rear door opening frame garnish molding in order to engage the retaining clips.
Garnish Molding Replacement - Right Side Front
Garnish Molding Replacement - Right Side Front
Removal Procedure
1. Remove the passenger side body side trim panel. Refer to Trim Panel Replacement - Right Body Side (See: ).
2. Remove the passenger side body side rear upper garnish molding. Refer to Garnish Molding Replacement - Body Side Rear Upper (See: ).
3. Grasp and gently pull the passenger side front corner garnish molding down in order to disengage the retaining clips.
4. Slip the seat belt through the slot in the passenger side front corner garnish molding.
5. Remove the passenger side front corner garnish molding from the vehicle.
6. Inspect the passenger side front corner garnish molding for broken or missing retaining clips. Replace the clips as needed.
Installation Procedure
