Savana 2500 V8-6.0L VIN U (2006)
1. Gently pull the hinge pillar trim panel in order to release the retaining clips.
2. Remove the hinge pillar trim from the vehicle.
3. Inspect the hinge pillar trim panel for broken or missing retaining clips. Replace the retaining clips as needed.
Installation Procedure
1. Install the hinge pillar trim panel to the vehicle.
2. Align the locator pins. Press on the hinge pillar trim panel in order to engage the retaining clips.
Windshield Garnish Molding Replacement
Windshield Garnish Molding Replacement
Removal Procedure
1. Remove the passenger side assist handle. Refer to Assist Handle Replacement - Front (See: Passenger Assist Handle/Service and Repair).
2. Grasp and gently pull the windshield garnish molding in order to release the clips.
