Savana 2500 V8-6.0L VIN U (2006)
12. Remove the CPA from the RF seat belt pretensioner yellow 2-way connector (1) located under the passenger seat.
13. Disconnect the RF seat belt pretensioner yellow 2-way connector (1) located under the passenger seat.
ENABLING PROCEDURE
1. Remove the key from the ignition.
2. Connect the steering wheel module yellow 4-way connector (2) located left of the steering column near the knee bolster.
3. Install the connector position assurance (CPA) (1) to the steering wheel module yellow 4-way connector (2).
4. Connect the LF seat belt pretensioner yellow 2-way connector (1) located under the driver seat.
5. Install the CPA to the LF seat belt pretensioner yellow 2-way connector (1) located under the driver seat.
6. Connect the I/P module yellow 4-way connector (1) located behind the I/P support.
7. Install the CPA to the I/P module yellow 4-way connector (1).
8. Install the right knee bolster bracket.
