gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Crankshaft Position Sensor > < Engine - MIL ON P0116/P1400 Set In Very Cold Temps|Page 6031
Page 2
background image

Tighten the ECT sensor to 20 N.m (15 lb ft).

3. Connect the ECT sensor electrical connector.
4. Refill the engine coolant. Refer to Draining and Filling Cooling System (Static Fill) Draining and Filling Cooling System (Vac N Fill) in Cooling

System.  See: Engine, Cooling and Exhaust/Cooling System/Service and Repair

Crankshaft Position Sensor > < Engine - MIL ON P0116/P1400 Set In Very Cold Temps|Page 6031