Savana 2500 V8-6.0L VIN U (2006)
34. Secure and insulate the connection using electrical tape.
35. Connect the deployment harness to the I/P module connector.
36. Route the deployment harness out of the vehicle's passenger side.
37. Stretch the driver side deployment harnesses to full length.
38. Stretch the passenger side deployment harnesses to full length.
39. Completely cover the windshield and front door window openings with a drop cloth.
40. Place a power source, 12 V minimum/2 A minimum, i.e. vehicle battery, near the shorted ends of the passenger side deployment harnesses.
41. Separate the ends of the I/P module deployment harness wires.
42. Connect the I/P module deployment harness wires to the power source in order to deploy the I/P module.
43. Disconnect the I/P module deployment harness wires from the power source.
44. Twist together one end of each wire of the I/P module on the passenger side deployment harness in order to short the wires.
