Savana 2500 V8-6.0L VIN U (2006)
1. Install the relay rod to the vehicle.
2. Install the relay rod to the pitman arm and idler arm.
3. Notice:
Refer to Fastener Notice in Service Precautions.
Install the new relay rod to the idler arm retaining nut.
Tighten the nut to 63 Nm (47 ft. lbs.).
4. Install the new relay rod to the pitman arm retaining nut.
Tighten the nut to 63 Nm (47 ft. lbs.).
5. Install the inner tie rods to the relay rod.
