Savana 2500 V8-6.0L VIN U (2006)
Transmission Mount: Service and Repair
4L80-E/4L85-E - Automatic Transmission
Transmission Mount Replacement
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Support the transmission with a transmission jack.
3. Remove the transmission support.
4. Remove the transmission mount mounting bolts, for RWD vehicles.
5. Remove the transmission mount mounting bolts, for 4WD vehicles.
6. Remove the transmission mount from the vehicle.
Installation Procedure
1. Install the transmission mount to the vehicle.
2. Notice:
Refer to Fastener Notice in Service Precautions.
Install the transmission mount mounting bolts, for 4WD vehicles.
Tighten the bolts to 50 Nm (37 ft. lbs.).
