Savana 2500 V8-6.0L VIN U (2006)
7. Drive the inner bearing cup into the wheel hub using the J24427 (2) and the J8092 (1).
8. Install the inner bearing.
Important: Each time you replace the wheel hub bearings, install a new oil seal in order to prevent the wheel hub from leaking.
9. Install the new oil seal using the J44420 (2) and the J8092 (1).
10. Install the rotor, if necessary.
11. Apply a light coat of high melting point EP bearing lubricant to the axle housing spindle.
