Savana 2500 V8-6.6L DSL Turbo (2008)
Important: Prior to painting, refer to the publication GM 4901M-D-2000 GM Approved Refinish Materials for recommended products.
Do not combine paint systems. Refer to paint manufacturer's recommendations.
1. Paint the bare surface of the pillar hinge mounting area according to GM refinish specification GM 4901M-D-2000.
Notice: Refer to Fastener Notice.
2. Install the service hinge and backing plate.
Tighten the bolts to 23 N.m (17 lb ft).
3. Apply clear silicone sealant around the entire edge of the service hinge to prevent water leaks.
4. Install the door.
5. Adjust adjacent front side door striker as necessary to achieve flushness between the two doors. Refer to Rear Side Door Latch Striker Adjustment
- Front.
6. Install interior trim at pillar.
