Savana 2500 V8-6.6L DSL Turbo (2008)
1. If the location of the emblem/nameplate has not been marked, apply tape.
2. Warm the door surface with a heat gun J 25070 152 mm (6.0 in) from the surface to a minimum of 21°C (70°F).
Important: Do not touch the adhesive backing of the emblem/nameplate.
3. Remove the backing from the front end of the emblem/nameplate.
4. Press the emblem/nameplate to the door panel surface while continuing to remove the backing.
5. Hand roll the emblem/nameplate to the door panel to ensure proper adhesion.
6. Inspect the emblem/nameplate for bonding.
7. Remove the tape from the area around the door emblem.
Radiator Grille Emblem/Nameplate Replacement
Radiator Grille Emblem/Nameplate Replacement
Removal Procedure
1. Remove the radiator grille.
2. Remove the nuts (1) that retain the emblem to the radiator grille.
3. Remove the emblem (3) from the radiator grille (2).
Installation Procedure
1. Install the emblem (3) to the radiator grille (2).
Notice: Refer to Fastener Notice.
