Savana 2500 V8-6.6L DSL Turbo (2008)
5. Install the bolts (7) to retain the seat cushion frame.
6. Install the bolts (7).
Tighten the bolts to 32 N.m (24 lb ft).
7. Install the seat cushion cover and pad.
8. Install the front seat into the vehicle.
Caution: To avoid personal injuries, re-zero the passenger presence system whenever you remove or replace the seat cushion or trim.
Failure to do so may cause the system to malfunction.
9. Re-zero the inflatable restraint passenger presence system whenever the seat cushion or any component of the passenger presence system is
removed. Refer to Passenger Presence System Programming and Setup.