Savana 2500 V8-6.6L DSL Turbo (2008)
Rocker Arm Assembly: Service and Repair
Valve Rocker Arm, Shaft, and Push Rod Replacement
Removal Procedure
1. Remove the lower valve rocker arm covers. Refer to Valve Rocker Arm Cover Replacement - Lower Left Side (LMM) (See: Valve Cover/Service
and Repair/Valve Rocker Arm Cover Replacement - Lower Left Side (LMM)) and Valve Rocker Arm Cover Replacement - Lower Right Side
(LMM) (See: Valve Cover/Service and Repair/Valve Rocker Arm Cover Replacement - Lower Right Side (LMM)) .
2. Loosen the valve clearance lock nuts on each rocker arm.
3. Loosen the valve clearance adjusting screw on each rocker arm in order to relieve tension on the valvetrain.
4. Remove the rocker arm shaft assembly bolts in the sequence shown. Leave the bolts in the rocker arm shaft brackets.
