Savana 2500 V8-6.6L DSL Turbo (2008)
Blower Motor Resistor: Service and Repair
Blower Motor Resistor Assembly Replacement
Blower Motor Resistor Assembly Replacement
Removal Procedure
Important: The blower motor relay is an integral part of the blower motor resistor and cannot be serviced separately from the resistor.
1. Disconnect the electrical connectors from the blower motor resistor assembly.
2. Disconnect the resistor to blower motor wire from the retainer on the heat case.
3. Remove the blower motor resistor assembly retaining screws (1).
4. Remove the blower motor resistor assembly (2) from the evaporator and blower module assembly (3).
Installation Procedure